Prev Machine
All
Next Machine

SCHIND CMF01 Marble and Granite Chamfering Machine

Our surface polishing marble granite chamfering machine provides series and standard production.
Our fully automatic polishing machine is easy to use and maintain, and it chamfers from the bottom.
Our machine is controlled by front panel and all heads are working independently of each other.
The polishing heads automatically work and come out just after the entrance of the stone till finishing the relevant area, then automatically turns off and goes back.
Heads can be disabled according to the process.
The polished part of the marble must be placed on the production belt.
Conveyor belt movement is electronic speed controlled and width is 450mm...
Our machine is produced as 6+2, 8+2, 10+2, 12+2, 14+2 standard according to the sort of natural stone.
Our 12+2 machine has 1 caliber, 5 bottom chamfer, 6 side chamfer, 1 deburring and 1 drip saw.
The machine can process minimum 70/80 mm and up to 1500 mm with a bottom supported compasses mechanism.
The engine section of the machine is completely protected from water by internal and external protective parts.
The protective panels are opened and closed with the help of shock absorbers for lubrication channels maintenance and abrasive replacement.
Felt is used to be resistant of heat and abrasion to protect the head bearings behind the abrasive.
If the customer wants our machine can be integrated into the herringbone diamond.

PARTS and TECHNICAL SPECIFICATIONS	10+2 HEAD	12+2 HEAD	14+2 HEAD	16+2 HEAD
Polishing Motor Power	5 Pcs 1.5 kw	6 Pcs 1.5 kw	7 Pcs 1.5 kw	8 Pcs 1.5 kw
Chamfering Motor Power	4 Pcs 1.5 kw	5 Pcs 1.5 kw	6 Pcs 1.5 kw	7 Pcs 1.5 kw
Chamfer Caliber Motor Power	1 Pc 2,2 kw	1 Pc 2,2 kw	1 Pc 2,2 kw	1 Pc 2,2 kw
Burr Chamfer Motor Power	1 Pc 1,5 kw	1 Pc 1,5 kw	1 Pc 1,5 kw	1 Pc 1,5 kw
Dropper Saw Motor Power	1 Pc 2,2 kw	1 Pc 2,2 kw	1 Pc 2,2 kw	1 Pc 2,2 kw
Upper Pressure Motor Power	0,75 kw	0,75 kw	0,75 kw	0,75 kw
Band Reducer Motor Power	1,5 kw	1,5 kw	1,5 kw	1,5 kw
Total Electric Motor Power	21,00 kw	25,50 kw	29,50 kw	34,50 kw
Min. Working Width	70 mm	70 mm	70 mm	70 mm
Working Thickness	10 - 40 mm	10 - 40 mm	10 - 40 mm	10 - 40 mm
Band Speed	0 - 350 cm/sec	0 - 350 cm/sec	0 - 350 cm/sec	0 - 350 cm/sec
Length / Width / Height	7100 x 1700 x 2100 mm	7500 x 1700 x 2100 mm	8100 x 1700 x 2100 mm	8500 x 1700 x 2100 mm
Water Required	32 lt/sec	35 lt/sec	40 lt/sec	45 lt/sec
Saw Disc Diameter	Q250 mm	Q250 mm	Q250 mm	Q250 mm
Opening Table Width	1400 mm	1400 mm	1400 mm	1400 mm
Pneumatic Pressure	1-3 bar	1-3 bar	1-3 bar	1-3 bar